TerraForma Drilling offers Standard Penetration Testing (SPT) services across Greater Sydney and regional NSW. We support geotechnical investigations, site classifications, and foundation assessments with calibrated equipment and a custom ute-mounted drilling platform designed for tight-access sites.
The Standard Penetration Test (SPT) is a common on-site method for testing soil. It measures soil resistance by counting the number of hammer blows required to drive a sampler into the ground. The resulting SPT N-values help engineers assess foundation design, site classification, and ground conditions.
While both Standard Penetration Testing (SPT) and Cone Penetration Testing (CPT) are used for geotechnical site investigations, SPT is commonly selected where borehole drilling, soil sampling, and direct subsurface information are required. Geotechnical engineers choose the appropriate testing method based on ground conditions, investigation objectives, and project requirements. Standard Penetration Testing is often used in Sydney and NSW before residential, commercial, infrastructure, or environmental projects begin. TerraForma uses calibrated equipment and a small drilling platform to reach places where larger rigs cannot.
The Standard Penetration Test (SPT) is a common on-site method for testing soil. It measures soil resistance by counting the number of hammer blows required to drive a sampler into the ground. The resulting SPT N-values help engineers assess foundation design, site classification, and ground conditions.
While both Standard Penetration Testing (SPT) and Cone Penetration Testing (CPT) are used for geotechnical site investigations, SPT is commonly selected where borehole drilling, soil sampling, and direct subsurface information are required. Geotechnical engineers choose the appropriate testing method based on ground conditions, investigation objectives, and project requirements. Standard Penetration Testing is often used in Sydney and NSW before residential, commercial, infrastructure, or environmental projects begin. TerraForma uses calibrated equipment and a small drilling platform to reach places where larger rigs cannot.
Standard Penetration Testing (SPT)
Calibrated SPT hammer and associated testing equipment
SPT N-value data and field records
Completed at consultant-specified depths and intervals
Ute-mounted tight-access geotechnical drilling rig
Suitable for constrained urban and restricted-access sites
Full hydraulic interlocks and safety systems
Documented maintenance programme and service records available on request
ISO 9001, ISO 14001, ISO 45001 certified systems
Within 24 hours across Greater Sydney
Same business day
Available on request
SPT testing supports a wide range of geotechnical investigation programmes across Greater Sydney and NSW.
We carry out Standard Penetration Testing in Sydney and NSW for commercial buildings, industrial sites, residential developments, and mixed-use construction projects.
Our calibrated Standard Penetration Testing gives N-value data that engineers use to assess soil strength, density, and subsurface conditions.
We provide SPT N-value data, borehole records, and field observations in a clear and organised format to support engineering assessment and project documentation.
We conduct SPT testing at the depths and intervals you specify, in accordance with your project requirements and bore plans.
Our small ute-mounted drilling platform allows Standard Penetration Testing in Sydney locations where larger rigs cannot reach.
Send us your bore plan, required SPT test intervals, investigation depths, and site access details so we can accurately scope your project.
We review your investigation requirements, provide a clear commercial proposal, and complete Dial Before You Dig (DBYD) enquiries before mobilisation as part of our commitment to safe field operations.
Our drilling team mobilises to your Sydney or NSW site and performs Standard Penetration Testing in accordance with your investigation plan and testing requirements.
Our calibrated SPT testing equipment provides reliable field data for geotechnical investigations across Greater Sydney and regional NSW. Calibration records are available on request before the first engagement.
Our custom ute-mounted drilling platform allows SPT testing on Sydney sites where standard rigs cannot operate, including narrow residential lots, low-clearance structures, and confined corridors across Greater Sydney.
We know how important Standard Penetration Test data is for engineering decisions. That’s why we align our testing with your investigation goals and project needs.
We can mobilise within 24 hours across Greater Sydney and offer quick support throughout NSW to help keep your investigation projects on track.
We use ISO-certified management systems, follow maintenance schedules, and provide WHS documentation to support compliant project delivery across Greater Sydney and regional NSW.
Every SPT test is documented with depth, blow count, N-value, and soil description recorded at the time of testing. Field records are handed directly to your nominated engineer or consultant on completion — no delays, no chasing.
Contact TerraForma Drilling to discuss calibrated Standard Penetration Testing, in-situ soil testing, and tight-access geotechnical investigations that support your next project in Sydney and NSW.
Or, Call: (02) 7239 8878
A Standard Penetration Test is an in-situ soil testing method used to measure soil resistance and density. The resulting SPT N-value data helps geotechnical engineers assess ground conditions for foundation design, site classifications, and engineering assessments.
Yes. TerraForma provides SPT testing in Sydney and regional NSW using calibrated equipment and a tight-access drilling platform for residential, commercial, infrastructure, and environmental investigations.
Yes. Our ute-mounted drilling rig enables Standard Penetration Testing on constrained sites, including narrow residential lots, low-clearance areas, and developed urban environments.
For most projects within Greater Sydney, TerraForma can mobilise within 24 hours of confirmation. Regional NSW mobilisation schedules are confirmed during the quoting process based on project requirements and location.
